Austin Healey 100/6 3000 Tubular Exhaust Header / Manifold

The original Healey Intake Manifolds are not only a poor design for air and fuel flow, but they are also becoming expensive to buy second-hand (and still in good condition).

Will fit all of the following:  BN6(6port) through the BJ8.

• Based on the 6-branch manifold designs for the works Healeys.

• 1 ¾ inch collectors into 2-inch outlets for increased gas flow and added performance!

  High-quality, thicker gauge mild steel pipe is used to reduce noise levels and finished in heat-proof paint.

  All pipes are shaped by the mandrel bending process so that the bore is not reduced, restricting the gas flow. Due to the shape of the pipes leaving the head, these manifolds are only to be used with SU carbs and may require modfication of the inlet manifold

  This system will require the front left-hand outrigger to be modified to the BJ8 design.

  2 OR 3 SU-MILD STEEL

• PERFORMANCE TIP: For the best results, use with our Fast Flow Intake Manifold.  But don't dispair, it can be used with smaller 1¾" carbs and the O.E.M. cast iron intake too.