Accueil
Triumph Spitfire / GT6 / Lotus 7 - Wire Wheel Conversion Kit
1
/
de
4
Triumph Spitfire / GT6 / Lotus 7 - Wire Wheel Conversion Kit
$399.99 USD
$399.99 USD
$425.95 USD
En vente
Épuisé
Frais d'expédition calculés à l'étape de paiement.
Only -14 units left
Impossible de charger la disponibilité du service de retrait
Secure checkout with
À propos du produit
These kits fit the following:
Triumph Spitfire (all models)
Triumph GT6 (all models)
Lotus 7
Triumph GT6 (all models)
Lotus 7
This kit converts steel wheel cars (listed above) to accept splined wire wheels. Simply bolt them on, add your new wire wheels from BritishWireWheels.com, tighten the spinners, and off you go.
IMPORTANT:
- Option #1 - hubs are specific to stock Spitfire, GT6, and Lotus 7 13" wheels. They are considered "Short Nose" hubs.
-
Option #2 - hubs for customers wanting to run wheels from an MGB, or TR series car (14" or 15"). These are considered "long nose" hubs. IMPORTANT - make sure your suspension is in proper order, and you have clearance on the inner fender well to run larger wire wheels and tires.
(see attached picture for visual - the depth of the stock splines is "shorter", or shallower, and the splines on the "long nose" hubs are longer to accept larger wire wheels.
* NOTE: Each of these bolt-on splined hubs will increase your track approximately 1.25" per corner. Calculate the backspace on your new wheels accordingly.
Everything you need is included:
4 Splined Hubs
16 mounting nuts
4 "Knockoff" spinners (2 left / 2 right)
(Product Source: England)
Free Shipping in the U.S. and Puerto Rico.



