Skip to content

FAQ: Weber Carburetor Conversions vs. Rebuilding Factory SUs

FAQ: Weber Carburetor Conversions vs. Rebuilding Factory SUs
this FAQ blog post answers one of the most posted questions on british car forums.  It gives an easy to understand explanation of the 32/36 DGV and DCOE weber carbs.
Q: My factory SU carburetors are worn out and impossible to tune. Why does this happen?A: Over decades of accelerating and decelerating, the steel or brass throttle shafts inside factory SU and Zenith-Stromberg carburetors wear oval-shaped grooves directly into the softer aluminum carburetor bodies. Because these carburetors rely on strict engine vacuum to lift their internal metering pistons, any unmetered air leaking past a worn throttle shaft creates a severe vacuum leak. This results in an erratic, uncontrollable high idle and a fuel mixture that is permanently lean and impossible to tune correctly. While the original bodies can be machined and re-bushed, many of our customers opt for a brand-new, genuine Weber conversion for out-of-the-box reliability.

Weber 32/36 DGV progressive downdraft carburetor, AI generated

Q: What is the Weber 32/36 DGV downdraft, and who is it for?
A: The Weber 32/36 DGV is the ultimate "set it and forget it" upgrade for classic car, and vintage land rover, owners focused on touring, daily driving, and reliability. It is a progressive two-barrel downdraft carburetor that mounts to a custom intake manifold, cleanly replacing a finicky twin-carburetor setup with a single, easy-to-tune unit.

  • How it works: Under normal cruising and light acceleration, the engine runs solely on the smaller 32mm primary barrel. This provides excellent fuel economy, crisp low-end throttle response, and a very smooth idle. When you press the pedal to the floor to pass or climb a hill, the larger 36mm secondary barrel opens mechanically, delivering a surge of fuel and air for maximum power.

  • Best for: Owners who want modern, turn-key reliability, smooth cruising, and a simplified engine bay without sacrificing performance.

 

 

Twin Weber DCOE side-draft carburetors, AI generated
Q: What is the Weber DCOE side-draft, and why would I choose these?
A: The Weber DCOE is a legendary, performance-oriented carburetor designed for maximum airflow and horsepower. Instead of a shared intake manifold, DCOEs provide "individual runner" induction—meaning every single engine cylinder gets its own direct, uninterrupted barrel of air and fuel.

  • How it works: DCOEs are infinitely tunable. Almost every internal component—from the main venturi (choke) to the idle jets, main jets, and emulsion tubes—can be swapped out to perfectly match your engine's cam profile, displacement, and altitude. They are usually installed in pairs (for 4-cylinder engines like the MGB) or triples (for 6-cylinders like the TR6 and the XKE).

  • Best for: Aggressive street driving, track days, and owners who want the distinct, throaty intake roar that side-draft Webers are famous for. Note: DCOEs require precise throttle-linkage balancing and a low-pressure fuel pump (set to 2–2.5 psi), as they are highly sensitive to fuel pressure.  This low-pressure pump/ regulator is available here:  LOW PRESSURE FUEL PUMP

Back to blog

Leave a comment

Please note, comments need to be approved before they are published.